Basic Info.
Handle Material
True Stone Coating Spraying
Max Working Pressure
6 Bar
Spraying Area Per Hour
80-120 Square Meter
Air Compressor Power
0.36kw or 3HP
Product Description
Bottom exhaust true stone coating sprayer
This item is the multi-function true stone paint and water-in-water paint
spray gun to instead the true stone paint air hopper gun.
Operating instruction:
1. True stone paint including coarse sand, medium sand and fine sand. Coarse sand is 20-30 mesh, medium sand is 40-70 mesh, fine sand is 80-120 mesh.
2. Application: Texture coating such as True stone paint, putty and relief coating. large area outwall spraying, mortar, rock slice paint, Diatom ooze Coating,relief coating,asphalt,grout spraying.
3. Material can be applied: True stone paint, putty,putty power,modelling putty, Abrasion-proof material, antiskid material,Some Cement based materials.Construction type: medium apartment ,commercial Internal wall spraying.
4. According to the field test without adding water: This spayer can spray fine sand paint 100-120 square meters/hour constantly,medium sand paint 100 square meters/hour constantly, coarse sand paint 80-100 square meters/hour constantly,10 times fast than spray manually.
5. Recommend to use with air compressor 0.36KW above or 3HP above.6. 30L pot can load 60KG true stone paint, pot inside height 38cm,dia 33cm,paint hose I.D 25mm.
Observe the following dos and don'ts.
1. Must stir the true stone paint well, then put it into the pot. Please must put the plastic cover over the paint at this movement, otherwise, the spraying will be failed.
2. The paint hose is long and paint is feed by pressure so it will take 30-60 seconds to spray out.
3. If stopping work for 20-30 minutes, must clean the spray gun,inner pot and paint hose. otherwise it will result in clog.
4. The operating pressure has been set to 4 bar,please don't move the pressure adj knob casually. The safety valve will be release pressure automatically when pressure exceed 6 bar. The max pressure can't be more than 6 bar. If operating it higher than 6 bar, we won't responsible for the problems.
5. Max operating pressure: 6bar nozzles in the set:4,6,8,10mm
Advantage of this sprayer:
1. Good effect, high pressure, good penetration, increasing the adhesion between the coating and the wall. Solving the bubble and crack problems of the coating.
2. Paint ultilization rate can be above 80%(Normal compressed air spray is 30%)
3. Also can be applied for the high viscosity paint which can't easy to dilute
4. few rebound, improving the working field, good for operator's health
5.Easy for operating, portable and low noise
Address:
Anli Industrial Zone, Xiachen Town, Jiaojiang, Taizhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Chemicals, Transportation
Company Introduction:
Our company supplies different kinds of rubber and plastic products, more detail like rubber parts for hand drier, shock pad, damping boot, dust cap ect. And main plastic product are plastic pedal for bikes. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.