Basic Info.
Handle Material
Multi-Color Spray Gun
Operating Pressure
0.35MPa
Optional Nozzle
2.0,2.5,3.0,3.5,4.0
Atomization Cap
Patented 6 Holes Cap
Feeding Type
Pressure Feed
Product Description
Water-in-water spraying,extended from the previous oil-in-water,water-in-oil spraying,
In the same system of two or more aqueous coatings coexist together,but imcompatible due to
the principle of the different surface tension caused by the presence of protective gel.
Multi-Color pattern system using various lance ions and various organic chemical cross-linking
in the polymer additives to form a gel, the gel is an elastomer which is soft and hard particles
adjustable, suitable for all patterns.
Advantage of water-in-water spraying
1.decorative effect and simulation of the surface made out of marble can do more than 95%
2.Low cost,a coating made out of the true stone cost only 10% of marble per square
3.enviromentally friendly,waterborne paint is no solvent release,won't pollute the enviroment
4 construction convenient,can be applied in the field.
Comparision of this gun with other guns
1.The nozzle, needle and liquid passage of it are made of 316 stainless steel ,it is very anti-corrosion, can spray a variety of corrosive paint.
2.Uniform fluid.
3.As manufactured by machine after birthed from the mold, it is of good quality.
4.Due to plating process, it has longer using life without oxidization.
5.CNC finishing atomizing air cap.
Application
All kinds of surface pattern coating,such as latex, metallic paint, fluorocarbon coating,multi-color coating,true
stone coating,art paint,granite paint, Imitation stone paint
Name | Type of pressure | Fluid nozzle orifice mm | Atomizing air pressure Kg/cm² | Air consumption l/min | Applied air cap |
Colorful pattern spray gun | Pressure | 2.5 | 1.5 | 325 | 6 holes air cap |
Operating instruction:
1. Air hose(read) and paint hose(white) connects the spray gun and paint pressure pot,quick coupler on the lid of pressure pot connect the air source(air compressor)
2. Put in the lid of pressure pot, take out the regulating valve knob. Rotate it clockwise, pressure in the pressure pot turn up. Rotate it anticlockwise, pressure in the pressure pot turn down. When adjust the pressure in the pressure pot to rated pressure, take in the knob for Self-lock. The pressure in the pressure pot rates at 1.5-2.5 bar normally. The pressure regulating valve only control the pressure for paint feed in the pressure pot. Exceeded high pressure will disrupt the
multi-color structure and increase the paint consumption.
3. There are 3 adjust knobs on the spray guns. The knob near air inlet is to adjust the air spraying volume of the spray gun. Too much air volume will disrupt the multi-color structure, and prevent to form the
big area dot shape pattern. Too less air volume will cause the uneven atomization, overspray the paint. The knob on the top of the spray gun can regulate the range of the pattern, the fineness of the multi-color pattern. The knob at the end of the spray gun can regulate the paint needle valve to control the paint delivery rate. During the application, shut down this knob to lock firstly then open the valve gradually (needle valve move backword) till proper position. In general, the more paint paint delivery rate the larger multi-color dot shape pattern. The more air volume,the smaller mult-color dot shape pattern,also saying-small dot spraying.
4. There is pressure leasing valve on the lid of pressure pot. When adding the paint, shut down the air inlet valve then open the leasing valve by pulling up the ring of the air leasing valve, exhausts the remain compressed air in the pressure pot, the indication on the air pressure regulation is zero.
5. Must clear the the spray gun and pressure pot carefully after the application. Keep the hoses being connected, add water in the pressure pot,keep spraying till no paint spray out. Before the storage, disassemble the connection hoses, open or lease the lid to avoid the overwear of the sealing parts.
Warning:The max pressure can't be exceeded 80Psi, if operate under over high pressure, we won't be responsible for the accident.
The advantage of pressure feed spray gun:
1.No paint cup on the spray gun to reduce the weight and make the operating easier and get better spraying performance.
2.Reduce the times to add the paint. make spraying work more efficient.
3.Easy to spray the work pieces with angular surface. hard to reach surface,improve the pattern while saving the paint.
Address:
Anli Industrial Zone, Xiachen Town, Jiaojiang, Taizhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Chemicals, Transportation
Company Introduction:
Our company supplies different kinds of rubber and plastic products, more detail like rubber parts for hand drier, shock pad, damping boot, dust cap ect. And main plastic product are plastic pedal for bikes. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.